Plywood is a type of artificial board is also one of the commonly used materials in furniture, because plywood is a single plate fiber direction of vertical glue, so in the storage and processing process should be in accordance with the correct method of operation, to prevent plywood open or damage.
The following are divided into several aspects for you to introduce the use of the process should pay attention to what problems.
1, storage code heap
Plywood purchase after the temporary not used, please put in the room, to avoid the sun and rain, plywood every time the turn down, please pad wood square, corner alignment stacked on the flat ground, the board surface must not be in contact with the ground, long-term storage, to maintain the template ventilation good, to prevent sun and rain, and regular inspection, it is best to cover with tartar.
2, how to saw the board
Please use alloy saw blade, diameter of 300 mm, 80-100 teeth, equipped with a secondary motor, preferably with a guide sawedge machine;
3, sealing the paint Plywood factory has been sealed edge, new cutting board or drilling, please use water-resistant phenolic series paint will be saw edge or drilling paint three times, remember!
If it is found that the template surface has scratches, bumps or other minor damage, should be brushed phenolic paint.
4, template paving method The wood side that is close to the plywood should be laid vertically, the seams of the plate should be as narrow as possible, and the plate should be flat between the plate and the board. Wood specifications are best 5 x 10 or 10 x 10 cm, plate seams with putty embedded flat, or with dry tape sealed to prevent leakage and slurry pollution of the edge of the board. Collision stoic or prying stick knocks, arbitrary throws and steel bars are strictly prohibited on the board.
